msts/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f101x6.s

/**
  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
  * @file      startup_stm32f101x6.s
  * @author    MCD Application Team
  * @brief     STM32F101x6 Devices vector table for Atollic toolchain.
  *            This module performs:
  *                - Set the initial SP
  *                - Set the initial PC == Reset_Handler,
  *                - Set the vector table entries with the exceptions ISR address
  *                - Configure the clock system   
  *                - Branches to main in the C library (which eventually
  *                  calls main()).
  *            After Reset the Cortex-M3 processor is in Thread mode,
  *            priority is Privileged, and the Stack is set to Main.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2017-2021 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */

  .syntax unified
  .cpu cortex-m3
  .fpu softvfp
  .thumb

.global g_pfnVectors
.global Default_Handler

/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss

.equ  BootRAM, 0xF108F85F
/**
 * @brief  This is the code that gets called when the processor first
 *          starts execution following a reset event. Only the absolutely
 *          necessary set is performed, after which the application
 *          supplied main() routine is called.
 * @param  None
 * @retval : None
*/

  .section .text.Reset_Handler
  .weak Reset_Handler
  .type Reset_Handler, %function
Reset_Handler:

/* Call the clock system initialization function.*/
    bl  SystemInit

/* Copy the data segment initializers from flash to SRAM */
  ldr r0, =_sdata
  ldr r1, =_edata
  ldr r2, =_sidata
  movs r3, #0
  b LoopCopyDataInit

CopyDataInit:
  ldr r4, [r2, r3]
  str r4, [r0, r3]
  adds r3, r3, #4

LoopCopyDataInit:
  adds r4, r0, r3
  cmp r4, r1
  bcc CopyDataInit
  
/* Zero fill the bss segment. */
  ldr r2, =_sbss
  ldr r4, =_ebss
  movs r3, #0
  b LoopFillZerobss

FillZerobss:
  str  r3, [r2]
  adds r2, r2, #4

LoopFillZerobss:
  cmp r2, r4
  bcc FillZerobss

/* Call static constructors */
    bl __libc_init_array
/* Call the application's entry point.*/
  bl main
  bx lr
.size Reset_Handler, .-Reset_Handler

/**
 * @brief  This is the code that gets called when the processor receives an
 *         unexpected interrupt.  This simply enters an infinite loop, preserving
 *         the system state for examination by a debugger.
 *
 * @param  None
 * @retval : None
*/
    .section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
  b Infinite_Loop
  .size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3.  Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
  .section .isr_vector,"a",%progbits
  .type g_pfnVectors, %object
  .size g_pfnVectors, .-g_pfnVectors


g_pfnVectors:


  .word _estack
  .word Reset_Handler
  .word NMI_Handler
  .word HardFault_Handler
  .word MemManage_Handler
  .word BusFault_Handler
  .word UsageFault_Handler
  .word 0
  .word 0
  .word 0
  .word 0
  .word SVC_Handler
  .word DebugMon_Handler
  .word 0
  .word PendSV_Handler
  .word SysTick_Handler
  .word WWDG_IRQHandler
  .word PVD_IRQHandler
  .word TAMPER_IRQHandler
  .word RTC_IRQHandler
  .word FLASH_IRQHandler
  .word RCC_IRQHandler
  .word EXTI0_IRQHandler
  .word EXTI1_IRQHandler
  .word EXTI2_IRQHandler
  .word EXTI3_IRQHandler
  .word EXTI4_IRQHandler
  .word DMA1_Channel1_IRQHandler
  .word DMA1_Channel2_IRQHandler
  .word DMA1_Channel3_IRQHandler
  .word DMA1_Channel4_IRQHandler
  .word DMA1_Channel5_IRQHandler
  .word DMA1_Channel6_IRQHandler
  .word DMA1_Channel7_IRQHandler
  .word ADC1_IRQHandler
  .word 0
  .word 0
  .word 0
  .word 0
  .word EXTI9_5_IRQHandler
  .word 0
  .word 0
  .word 0
  .word 0
  .word TIM2_IRQHandler
  .word TIM3_IRQHandler
  .word 0
  .word I2C1_EV_IRQHandler
  .word I2C1_ER_IRQHandler
  .word 0
  .word 0
  .word SPI1_IRQHandler
  .word 0
  .word USART1_IRQHandler
  .word USART2_IRQHandler
  .word 0
  .word EXTI15_10_IRQHandler
  .word RTC_Alarm_IRQHandler
  .word 0
  .word 0
  .word 0
  .word 0
  .word 0
  .word 0
  .word 0
  .word 0
  .word BootRAM        /* @0x108. This is for boot in RAM mode for
                          STM32F10x Low Density devices.*/

/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/

  .weak  NMI_Handler
  .thumb_set NMI_Handler,Default_Handler

  .weak  HardFault_Handler
  .thumb_set HardFault_Handler,Default_Handler

  .weak  MemManage_Handler
  .thumb_set MemManage_Handler,Default_Handler

  .weak  BusFault_Handler
  .thumb_set BusFault_Handler,Default_Handler

  .weak  UsageFault_Handler
  .thumb_set UsageFault_Handler,Default_Handler

  .weak  SVC_Handler
  .thumb_set SVC_Handler,Default_Handler

  .weak  DebugMon_Handler
  .thumb_set DebugMon_Handler,Default_Handler

  .weak  PendSV_Handler
  .thumb_set PendSV_Handler,Default_Handler

  .weak  SysTick_Handler
  .thumb_set SysTick_Handler,Default_Handler

  .weak  WWDG_IRQHandler
  .thumb_set WWDG_IRQHandler,Default_Handler

  .weak  PVD_IRQHandler
  .thumb_set PVD_IRQHandler,Default_Handler

  .weak  TAMPER_IRQHandler
  .thumb_set TAMPER_IRQHandler,Default_Handler

  .weak  RTC_IRQHandler
  .thumb_set RTC_IRQHandler,Default_Handler

  .weak  FLASH_IRQHandler
  .thumb_set FLASH_IRQHandler,Default_Handler

  .weak  RCC_IRQHandler
  .thumb_set RCC_IRQHandler,Default_Handler

  .weak  EXTI0_IRQHandler
  .thumb_set EXTI0_IRQHandler,Default_Handler

  .weak  EXTI1_IRQHandler
  .thumb_set EXTI1_IRQHandler,Default_Handler

  .weak  EXTI2_IRQHandler
  .thumb_set EXTI2_IRQHandler,Default_Handler

  .weak  EXTI3_IRQHandler
  .thumb_set EXTI3_IRQHandler,Default_Handler

  .weak  EXTI4_IRQHandler
  .thumb_set EXTI4_IRQHandler,Default_Handler

  .weak  DMA1_Channel1_IRQHandler
  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler

  .weak  DMA1_Channel2_IRQHandler
  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler

  .weak  DMA1_Channel3_IRQHandler
  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler

  .weak  DMA1_Channel4_IRQHandler
  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler

  .weak  DMA1_Channel5_IRQHandler
  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler

  .weak  DMA1_Channel6_IRQHandler
  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler

  .weak  DMA1_Channel7_IRQHandler
  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler

  .weak  ADC1_IRQHandler
  .thumb_set ADC1_IRQHandler,Default_Handler

  .weak  EXTI9_5_IRQHandler
  .thumb_set EXTI9_5_IRQHandler,Default_Handler

  .weak  TIM2_IRQHandler
  .thumb_set TIM2_IRQHandler,Default_Handler

  .weak  TIM3_IRQHandler
  .thumb_set TIM3_IRQHandler,Default_Handler

  .weak  I2C1_EV_IRQHandler
  .thumb_set I2C1_EV_IRQHandler,Default_Handler

  .weak  I2C1_ER_IRQHandler
  .thumb_set I2C1_ER_IRQHandler,Default_Handler

  .weak  SPI1_IRQHandler
  .thumb_set SPI1_IRQHandler,Default_Handler

  .weak  USART1_IRQHandler
  .thumb_set USART1_IRQHandler,Default_Handler

  .weak  USART2_IRQHandler
  .thumb_set USART2_IRQHandler,Default_Handler

  .weak  EXTI15_10_IRQHandler
  .thumb_set EXTI15_10_IRQHandler,Default_Handler

  .weak  RTC_Alarm_IRQHandler
  .thumb_set RTC_Alarm_IRQHandler,Default_Handler